|
|
Build Your Online Product Catalogs?
| Product Name: |
concrete reinforcement mesh
|
| Supply Ability: |
|
| Related proudcts |
wire mesh, construction, rebar, |
| Specifications |
in panels |
| Price Term: |
|
| Port of loading: |
|
| Minimum Order |
|
| Unit Price: |
|
|
SPECIFICATIONS
1) STANDARD MESH FOR CONCRETE REINFORCEMENT
The production of mesh reinforcement complies to BS 4483. Mesh is produced from cold reduced deformed steel wires according to BS 4482.
a) Mechanical Properties
Specified characteristic strength: 460 N/mm?/font>
Tensile Strength: min 510 N/mm? In addition either the tensile strength recorded in the tensile test shall be at least 5% greater than the recorded yield strength or alternatively the minimum elongation shall be not less than 12% measured on a gauge length of 5do.
Shear strength of the weld: The shearing load required to produce failure of a welded intersection shall be not less than 0.25 A fy, where A is the nominal cross-sectional area of the smaller wire at the welded intersection and fy is the characteristic yield stress of the wire (460 N/mm?.
b) Chemical composition of steel
Carbon C: max 0.25%
Sulphur S: max 0.060%
Phosphorous P: max 0.060%
Carbon Equivalent Value Ceq: max 0.42%
Where Ceq = C + Mn/6 + (Cr+V+Mo)/5 + (Cu+Ni)/15
|
| Company: |
Anping Huilong Wire Mesh Manufacture Co.,Ltd.
|
| Contact: |
Mr. Gary Liu |
| Address: |
Kaihua Road, Taicheng Industrial Park, |
| Postcode: |
053600 |
| Tel: |
86-318-7522333 |
| Fax: |
86-318-7617775 |
| E-mail: |
|
|
|
|
Home
